Changelog STEREOPING Synth Controller firmwares 12/2022 - Bugfix for ND2 to V1.5: bugfix and new feature for user selectable filtering of notes on channel 1-6 11/2022 - Bugfix for uniCC to V1.1: incoming realtime messages (midiclock) blocked further sending of knob turning 07/2022 - Bugfix for Thet4 to V3.5: LAYER A/B selection&editing now working, improved button-release behaviour for SEQ line select 06/2022 - New editios: Sample Polka, ND2 and AX73VX90 09/2020 - Update 1016R to V3.6: bugfix, init patch was not sent after update to V3.5 09/2020 - New Edition ‚Bit‘ for Crumar Bit One/01/99 with tauntek firmware 08/2020 - Update 1016R to V3.5: Matrix6 mode now also sends negative modulations (see addendum) 07/2020 - Update ESQ8 to V1.3: split into 2 versions for ESQ1/M and SQ80 05/2020 - Update 1OH1 to V3.3: LFO RATE can now be adjusted FINE if 3rd button is active 05/2020 - Update 1016R and 81Z to V3.4: midi issues fixed 05/2020 - Update Mirco to V3.3: CC-translation problems solved 03/2020 - Update 1016R and 81Z bugfix to V3.3: CC-translation was not slowed down (like pot movements) to prefent hickups (M1000) and Buffer Overflow (81Z) 09/2019 – New Editions for EMU Ultra Proteus/Morpheus ('Ultra-Fun'), Korg MicroKorg ('MircoGork') and Roland JX3P with Organix/River expansion ('Organ3P') 02/2019 – New Edition ‚DS-8‘ for Korg DS-8 11/2018 – New Edition ‚PH-800‘ for Korg Poly-800 with HAWK Erweiterung 07/2018 – New Edition ‚Monsta Controller‘ for Audiothingies MicroMonsta 03/2018 – New edition ‚SX240‘ for Kawai SX-240 with Tauntek EPROM 05/2017 – Update for Editions 1016R, 8P, 8000, G8P, K1, K3, K4, Alpha, Microwave 1&2, JX70 und M-80 – bugfix:CC translation now only on basechannel, CCs on other midichannels are passed thru 07/2017 – Update ‘Thet4’ auf V3.4 – bugfix:VCA Env Sustain knob sent VCF Env Sustain 05/2017 – Update ’81Z’ to V3.21 – bugfixes:CC translation now only on basechannel, KVS of OP4 now working 02/2017 – Update ’81Z’ to V3.1 – additional parameters like LFO DELAY, pitch envelope for DX11 and more 01/2017 – Bugfix for ‘M-80’ to V3.2 – many issues of V3.0 fixed. This firmware was used for the demovideo 12/2016 – Bugfix for ‘1016R’ to V3.1 – wrong values in extreme positions of DCO1 LFO1 pitch, DCO2 LFO2 PW, ENV 1 VCF Amnt and Env 3 FM Amnt 12/2016 – New editions ‘K4’ for Kawai K4/K4r and ‘M-80’ for Roland MKS-80 07/2016 – New Edition ‘Super Quart7’ for Roland MKS-7 Super Quartet 07/2016 – New Edition ‘Thet4’ for DSI TETRA 06/2016 – Updated ‘Juno66’ to V3.1 to supply the 3 new parameters introduced in Tubbutec OS V1.23 06/2016 – Updated ‘1oh1’ to V3.1: Bugfix. CC# for remoting the SH101 are not passed through 06/2016 – New Edition ‘JX-70’ for MKS-70 und JX-10 05/2016 – SixTweak to V3.1 – passes all CC thru to the SixTrak for external Midi-Modulation 05/2016 – New edition ‘G8-P’ for Roland GP-8 03/2016 – ESQ8 from Beta to V0.6 – ‘All notes off’ now working 02/2016 – all Firmwares now at V3.0. All channels, realtime- and Sysex-Data will be passed through, no filtering anymore. Bugfix: after receiving an aftertouch-event pot-tweaking did not send data until any other event came in. 02/2016 – 1016R to 3.0: Bugfix. Init#Patch function did not work 08/2015 – Microwave to V1.9: Bugfix. All Midichannels above Channel 1 were blocked 03/2015 – AlphaJ to V1.44: Bugfix. Midichannel for Chord Memory select and ‘Mono/Poly/Chord’ was not learable and always kept on channel 1 03/2015 – AlphaJ to V1.43: Bugfix. Range for all envelope levels now 0-127. Recent versions ranged 0-32 02/2015 – 81Z to V1.41: data is sent even slightly slower to prevent the TX81Z’s ‘Midibuffer full’. This version was used for the video Demo-Video 02/2015 – AlphaJ to V1.42: ‘Mono/Poly’ offers selection of the 3 patch settings ‘Mono/Poly/Chord’ on the MKS-50 (no function on Alpha Juno). The empty green knob between ‘VFC LFO’ and ‘VCF AFTR’ now allows the selction of one of the 16 Patch Chord Memory Presets (not supported by Alpha Juno). This parameter can be controlled by CC No 49. PORTAMENTO now not only changes the Portamento-Time but also turns it On (Times>0) and Off (leftmost position) 12/2014 – 1006r to V1.4: mididata filter now lets pass mididata on all midichannels to allow guitar mode 12/2014 – 8000 to V1.4: Midiclock now passes through for external syncing of arpeggiator 11/2014 – Microwave to V1.5: Bugfixes CC/SysEx-Translator and Bypass/Filtering of Midichannels > 1 08/2014 – all Editions to 1.3: resolution of some parameters while turning a knob now correspond the resolution of the synths parameter. Some values were skipped in prior versions. 08/2014 – 1006R to V1.3: Matrix 6/6r now supported. Further noticable optimisation of problemativ parameters 01/2022 – ESQ8 to V1.5: bugfix for midi running status